Compre Parafusos e risers para skateboards
Eu preciso de risers num skate?
Ao usar risers, você aumenta a distância entre o deck e as rodas, o que evita wheel bites. No entanto, você provavelmente não precisará de risers para rodas de skate comuns com um diâmetro de até 54 mm.
Como escolher o comprimento correto dos parafusos do skate?
Ao construir o seu skate, você deve escolher o comprimento dos parafusos de acordo com a espessura dos risers. Como regra geral, se você usar risers, você deve escolher parafusos com pelo menos 1 polegada. Se não usar risers, os parafusos devem ter cerca de 7/8“ a 1 polegada de comprimento
Risers | Comprimento do parafuso |
Sem riser | Parafusos 7/8 "- 1" |
Almofadas de riser de 1/8 ” | Parafusos de 1 "- 1 1/8" |
1/4 “almofadas de riser | Parafusos de 1 1/4 ″ |
1/2 “almofadas de riser | Parafusos de 1 1/2 ″ |
Produtos similares
Enuff 1mm Shock Pads 2-Pack
2,95 €Espessura do produto: 0.04" (0.1cm)
(165)
Independent 1/8" Risers 2-Pack
4,95 €Espessura do produto: 0.125" (0.3cm)
(60)
Independent 1/4" Risers 2-Pack
5,95 €Espessura do produto: 0.25" (0.6cm)
(47)
Independent 1/8" Shock Pads 2-Pack
4,95 €Espessura do produto: 0.125" (0.3cm)
(61)
![Independent Phillips Bolts](https://cdn.skatepro.com/product/400/independent-phillips-skateboard-hardware.webp)
Independent Phillips Bolts
5,95 €Length: 7/8", 1", 1.25", 1.5"
(354)
![Pig Piles Soft Skateboard Risers 2-Pack](https://cdn.skatepro.com/product/400/pig-piles-soft-skateboard-risers-2-pack-q0.webp)
Pig Piles Soft Skateboard Risers 2-Pack
4,95 €Espessura do produto: 0.125" (0.3cm)
(8)
![Loaded 1/16](https://cdn.skatepro.com/product/400/loaded-1-16-rectangular-shock-pads.webp)
Loaded 1/16" Rectangular Shock Pads
1,95 €Espessura do produto: 1/16" (0.16cm)
(4)
![Venom Redheads Truck Bolts 8 Pack](https://cdn.skatepro.com/product/400/venom-redheads-skateboard-hardware-8-pack-yl.webp)
Venom Redheads Truck Bolts 8 Pack
7,95 €Length: 1", 1.25", 1.5"
(24)
![Hydroponic Risers](https://cdn.skatepro.com/product/400/hydroponic-risers-risers-q8.webp)
Hydroponic Risers
5,95 €Espessura do produto: 0.47" (1.2cm)
(4)
![Independent Allen key Bolts](https://cdn.skatepro.com/product/400/independent-allen-key-skateboard-hardware-ab.webp)
Independent Allen key Bolts
3,95 €Length: 7/8", 1"
(89)
![Pivot 2020 Riser Pads 2-Pack](https://cdn.skatepro.com/product/400/pivot-2020-riser-pads-2-pack-w3.webp)
Pivot 2020 Riser Pads 2-Pack
4,95 €Espessura do produto: 0.125" (0.3cm)
(7)
![Pig Bolts](https://cdn.skatepro.com/product/400/pig-skateboard-hardware-5a.webp)
Pig Bolts
8,95 €Length: 7/8", 1", 1.25"
(46)
![Krux 1/4](https://cdn.skatepro.com/product/400/krux-1-4-skateboard-riser-pads-2-pack.webp)
Krux 1/4" Skateboard Riser Pads Pacote de 2
7,95 €Espessura do produto: 0.25" (0.6cm)
(4)
![1/8](https://cdn.skatepro.com/product/400/1-8-longboard-skateboard-risers-g1.webp)
1/8" Riser Pads
5,95 €Espessura do produto: 0.125" (0.3cm)
(12)
![Primitive Allen Key Bolts](https://cdn.skatepro.com/product/400/primitive-allen-key-skateboard-hardware.webp)
Primitive Allen Key Bolts
5,95 €Length: 7/8"
(17)
![Bear Trucks Flat Riser Pads](https://cdn.skatepro.com/product/400/bear-trucks-flat-longboard-skateboard-risers-ay.webp)
Bear Trucks Flat Riser Pads
5,95 €Espessura do produto: 0.25" (0.6cm)
(13)
![Krux Krome Phillips Bolts](https://cdn.skatepro.com/product/400/krux-krome-phillips-skateboard-hardware-r9.webp)
Krux Krome Phillips Bolts
7,95 €Length: 1"
(49)
![Independent Skateboard Kingpin Nut](https://cdn.skatepro.com/product/400/independent-skateboard-kingpin-nuts-h0.webp)
Independent Skateboard Kingpin Nut
1,95 € (1)
![Venom 1/8](https://cdn.skatepro.com/product/400/venom-1-8-longboard-skateboard-risers-2-pack-h.webp)
Venom 1/8" Risers 2 Pack
8,95 €Espessura do produto: 0.125" (0.3cm)
(26)
![Hydroponic Nuts Skateboard Hardware](https://cdn.skatepro.com/product/400/hydroponic-nuts-skateboard-hardware-rp.webp)
Hydroponic Nuts Skateboard Hardware
5,95 €Length: 1"
(10)
![Pivot Phillips Hardware de Montagem de Skate](https://cdn.skatepro.com/product/400/pivot-phillips-mounting-skateboard-hardware-wf.webp)
Pivot Phillips Hardware de Montagem de Skate
4,95 €Length: 7/8", 1", 1.25"
(5)
![Pivot Rebuild Kit Skateboard Hardware](https://cdn.skatepro.com/product/400/pivot-rebuild-kit-skateboard-hardware-gh.webp)
Pivot Rebuild Kit Skateboard Hardware
9,95 € (7)
![Enuff Truck Bolts](https://cdn.skatepro.com/product/400/enuff-skateboard-hardware-4n.webp)
Enuff Truck Bolts
4,95 €Length: 1"
(180)
![Venom Phillips Hardware](https://cdn.skatepro.com/product/400/venom-phillips-hardware-30.webp)
Venom Phillips Hardware
4,95 € (10)
![Enuff 1'' Truck Bolts Multicolor](https://cdn.skatepro.com/product/400/enuff-1-skateboard-hardware-multicolor-9l.webp)
Enuff 1'' Truck Bolts Multicolor
5,95 €Length: 1"
(79)
![Killer Head Hardware de Montagem de Skate](https://cdn.skatepro.com/product/400/killer-head-mounting-skateboard-hardware-fi.webp)
Killer Head Hardware de Montagem de Skate
4,95 €Length: 7/8", 1", 1.25"
(4)
![Enjoi Little Buddies Anodized 1](https://cdn.skatepro.com/product/400/enjoi-little-buddies-anodized-1-skateboard-hardware.webp)
Enjoi Little Buddies Anodized 1" Bolts
6,95 €Length: 1"
(16)
![Pig Skateboard Hardware 8-Pack](https://cdn.skatepro.com/product/400/pig-skateboard-hardware-8-pack-ub.webp)
Pig Skateboard Hardware 8-Pack
4,95 €Length: 1", 1.25"
(11)